Intelligent Glass Defect Scanner-Vertical Type

• Customization: Available
• Certification: CE, ISO
• Condition: New
• Model NO.: RT-LMSC
• Specification: 3000mm
• Trademark: SWANK GLASS
• Origin: China
• HS Code: 8475291900

Product Description

1. Glass defect scanner
This machine used for scan glass surface defect, such as: Bubbles, inclusion, scratches, coating defect, water, stains, etc. 

2. Glass quality control challenges
Quality demand: Increasingly stringent quality requirements; Quality differentiation of the market competition strategy.
Production efficiency: Manual defect detection is inefficient; unable to match the efficiency of intelligent connectivity.
Digital Management: Defect date cant' analyzed; don't optimize production lien quality improvement.
Standardization: Manual inspection depends on subjective instability; undetermined quality standard data.
Labor cost: Growing shortage of workers and high costs; Decline in the efficiency and standard of frontline workers.
Technical obstacle: High cost of imported equipment, long service cycle; Slow technology update, weak pertinence for local market.
Defect types:
Suitable for defect: Edge chip detection; Dirt; Inclusion; Scratch; Bubble.

3. Layout:
We are dedicated to enhancing the intelligent quality control across all of processes. Integrates intelligent data acquisition, decision-making guidance, machine parameter adjustment, and data traceability. This approach aims to maximize production efficiency and generate accurate quantitative reports.

4. Configuration characteristics:


5. Main specification and parameters:

Type   Configuration	RT-CGSC	RT-IGSC	RT-HTSC	RT-LMSC
Length/width	2.5/2.8/3.3 m	2.5/2.8/3.3 m	2.5/2.8/3.3 m	2.5/2.8/3.3 m
Installation	Horizontal	Vertical	Horizontal	Horizontal
Camera type	Linear array	Linear array	Linear array	Linear array
Camera pixels	0.1mm/pixel	0.1mm/pixel	0.1mm/pixel	0.1mm/pixel
Bright+ Dark field light	Yes	Yes	Yes	Yes
Back light	Yes	Option	Yes	Yes
Water cooled light	Option	Option	Option	Option
Glass type	Float glass; Ultra; coating; Low-e; Printing; Lamination
Defect type	Bubbles, inclusion, scratches, coating defect, water, stains, etc

6. Detection rate:

Type	Detect size	Detection rate
Inclusion	≥0.3 mm	≥94%
	≥0.5 mm	≥98%
Bubbles	≥0.3 mm	≥94%
	≥0.5 mm	≥98%
Edge chip	Surface size ≥ 0.8mm	≥95%
Dirt	≥0.5mm^2	≥98%
Scratch	Length ≥1 mm	≥98%
	Depth ≥ 0.3 mm
	Width ≥ 0.3 mm
Water	≥0.5 mm^2	≥98%
Overall missed detection rate		<2%
Overall missed detection rate		<2%
NOTE: 1. The min defect size of this system is 0.1mm. 2. Position deviation: movement direction ±2mm. 3. When the glass transmittance is <35%, the detection rate will decrease, but the detection rate > 90%. 4. This parameter is sampled according to the glass thickness of 6mm. If the glass thickness is increased, the detection rate will be reduced, but it is still > 90%. 5. The glass needs to be scanned at a constant speed and smooth transmission, and the defect detection index will be reduced. 6. After scanning the glass, the final result will be detected within 2seconds (larger glass going to be slower); 7. The glass interval must be greater than 200mm. 8. It is necessary to ensure that there is no foreign body on site to avoid the failure to guarantee defect detection and missed detection.